This tutorial is going to show you how to make a supersaw that sounds like this.
1. Open up a Sytrus channel on the default patch and set the waveform shape to a saw for OP 1, OP 2 and OP 3.
Set the OUT in the matrix as about 60% for OP 1, OP 2 and OP 3.
3. By clicking and dragging the digit you want to change, set the freq ratio to: 1.0000x for OP 1; 1.9900x for OP 2 and 2.0100x for OP 3.
4. Set the FX on the matrix to 100% for OP 1, OP 2 and OP 3.
5. Select the MAIN tab and find the unison bit in the top right corner. Set it’s settings roughly like this.
6. Alter the attack in any way you like and add any effects like reverb or chorus and you have your own supersaw! Now go be the next big trance act!
Here‘s the .flp if you want it. 🙂
Allaboutaudio 